Airworthiness Directive 2014-07-06
one-timeAirworthiness Directives; Turbomeca S.A. Turboshaft Engines
What this AD requires
We are superseding airworthiness directive (AD) 2007-19-09R1 for all Turbomeca S.A. Arriel 2B1 turboshaft engines that do not have modification TU157 incorporated. AD 2007-19-09R1 required replacement of the hydromechanical metering unit (HMU) with a serviceable HMU. This AD requires HMU replacement; reduction of the compliance interval; and inclusion of the power turbine C2 cycle consumption rate when determining compliance times. This AD was prompted by reports of ruptures on HMU constant delta pressure valves that have less than 2,000 hours in service. We are issuing this AD to prevent failure of the HMU, which could lead to damage to the engine, and damage to the aircraft.
Which aircraft AD 2014-07-06 applies to
Applies only to engines that do not have modification TU157 incorporated.
Whether AD 2014-07-06 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.