Airworthiness Directive 2014-06-10
one-timeAirworthiness Directives; Airbus Airplanes
What this AD requires
We are superseding Airworthiness Directive (AD) 2010-23-12 for certain Airbus Model A330 and Model A340 series airplanes. AD 2010-23- 12 required inspecting to determine the part number for Thales Avionics Angle of Attack (AoA) probes, and replacing any affected probe with a serviceable probe. This new AD adds airplanes to the applicability and, for certain airplanes, requires that those affected probes be replaced. This AD was prompted by reports that the AoA sensors on certain airplanes were modified and re-identified without performing the inspection to determine the part number; therefore, the affected probes were not replaced with serviceable probes. We are issuing this AD to prevent erroneous AoA information and consequent delayed activation or non-activation of the AoA protection systems, which, in combination with flight at a high angle of attack, could result in reduced controllability of the airplane.
Which aircraft AD 2014-06-10 applies to
Whether AD 2014-06-10 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.