Is AD 2013-26-14 a recurring Airworthiness Directive?

Yes — AD 2013-26-14 requires a repetitive inspection every 60 months. Next-due depends on the aircraft's time in service.

Which aircraft does AD 2013-26-14 apply to?

AD 2013-26-14 applies to Airbus — models A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2013-26-14

recurring

Official AD 2013-26-14 · FR doc 2014-04954 · 2014-03-28 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are superseding Airworthiness Directive (AD) 2008-08-04 for certain Airbus Model A318, A319, A320, and A321 series airplanes. AD 2008-08-04 required repetitive inspections for cracking in the forward lug of the support rib 5 fitting of the left and right main landing gear (MLG), and repair or replacement of any cracked MLG fitting if necessary. AD 2008-08-04 also required modification of the rib bushings of the left and right MLG, which ended the repetitive inspections. This new AD requires, for airplanes on which certain modifications or repairs have been done, repetitive inspections for cracks of the forward lug of each left-hand and right-hand MLG support rib 5 fitting, and repair if necessary; and adds Model A318 series airplanes to the applicability. Replacement of an MLG support rib 5 fitting terminates the repetitive inspection requirements for the MLG support rib 5 fitting at that position. This AD was prompted by reports of cracks found in the forward lug of the MLG support rib 5 fitting. We are issuing this AD to prevent cracking in the forward lug of the MLG, which could result in failure of the lug and consequent collapse of the MLG during takeoff or landing.

Repetitive inspection. Re-inspect every 60 months. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2013-26-14 applies to

MakesAirbus

ModelsA318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-111, A320-211, A320-212, A320-214, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A318, A319, A320, A321

Whether AD 2013-26-14 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2013-26-14 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.