Airworthiness Directive 2014-05-16
one-timeAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-200B, 747-300, 747-400, 747-400D, 747-400F series airplanes, and Model 767 series airplanes, powered by General Electric (GE) CF6-80C2 engines. This AD was prompted by reports of failure of the electro mechanical brake flexshaft (short flexshaft) of the thrust reverser actuation system (TRAS). This AD requires replacing the short flexshaft on each engine with a new short flexshaft, testing of the electro mechanical brake and center drive unit (CDU) cone brake to verify the holding torque, and performing related investigative and corrective actions if necessary. We are issuing this AD to prevent an uncommanded in-flight thrust reverser deployment and consequent loss of control of the airplane.
Which aircraft AD 2014-05-16 applies to
Applies to airplanes powered by General Electric (GE) CF6-80C2 engines: 747 models as identified in Boeing Alert Service Bulletin 747-78A2185, dated October 26, 2010; 767 models as identified in Boeing Alert Service Bulletin 767-78A0100, dated October 26, 2010.
Whether AD 2014-05-16 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.