Is AD 2014-05-21 a recurring Airworthiness Directive?

Yes — AD 2014-05-21 requires a repetitive inspection. Next-due depends on the aircraft's time in service.

Which aircraft does AD 2014-05-21 apply to?

AD 2014-05-21 applies to Boeing — models 737-100, 737-200, 737-200C, 737-300, 737-400, 737-500, 737. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2014-05-21

recurring

Official AD 2014-05-21 · FR doc 2014-04838 · 2014-03-18 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

We are superseding airworthiness directive (AD) 2008-11-04 for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. AD 2008-11-04 required repetitive inspections for cracking in and around the upper and lower hinge cutouts of the forward entry and forward galley service doorways, and corrective actions if necessary. This new AD reduces the inspection threshold for cracking in and around the galley service doorway hinge cutouts, adds inspections of certain repaired structure at the forward entry and galley service doorway upper and lower hinge cutouts, expands the inspection area at the forward entry and galley service doorway upper and lower hinge cutouts, and removes certain airplanes from the applicability. This AD was prompted by multiple reports of cracks in the skin and/or bear strap at the forward galley service doorway hinge cutouts, and multiple reports of cracking under the repairs installed at the hinge cutouts. We are issuing this AD to detect and correct such cracking, which could result in rapid decompression of the airplane.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2014-05-21 applies to

MakesBoeing

Models737-100, 737-200, 737-200C, 737-300, 737-400, 737-500, 737

Applies to airplanes identified in Boeing Service Bulletin 737-53A1200, Revision 2, dated September 12, 2012.

Whether AD 2014-05-21 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2014-05-21 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.