Is AD 2014-05-12 a recurring Airworthiness Directive?

Yes — AD 2014-05-12 requires a repetitive inspection. Next-due depends on the aircraft's time in service.

Which aircraft does AD 2014-05-12 apply to?

AD 2014-05-12 applies to Boeing — models 737-100, 737-200, 737-200C, 737-300, 737-400, 737-500, 737. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2014-05-12

recurring

Official AD 2014-05-12 · FR doc 2014-04819 · 2014-03-18 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

We are superseding Airworthiness Directive (AD) 2010-15-08 for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. AD 2010-15-08 required repetitive inspections for discrepancies of each carriage spindle of the outboard mid-flaps; repetitive gap checks of the inboard and outboard carriages of the outboard mid-flaps to detect fractured carriage spindles; measuring to ensure that any new or serviceable carriage spindle meets minimum allowable diameter measurements taken at three locations; repetitive inspections, measurements, and overhaul of the carriage spindles; replacement of any carriage spindle when it has reached its maximum life limit; and corrective actions if necessary. This new AD requires reducing the life limit of the carriages, reducing the repetitive interval for certain inspections and gap checks for certain carriages. This new AD also adds an option, for certain replacements, of doing an inspection, and related investigative and corrective actions if necessary. This AD was prompted by a report of failure of both flap carriages. We are issuing this AD to detect and correct cracked, corroded, or fractured carriage spindles, which could lead to severe flap asymmetry, and could result in reduced control or loss of controllability of the airplane.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2014-05-12 applies to

MakesBoeing

Models737-100, 737-200, 737-200C, 737-300, 737-400, 737-500, 737

Whether AD 2014-05-12 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2014-05-12 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.