Airworthiness Directive 2013-24-11
recurringAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP series airplanes. This AD was prompted by a report of a disbonded doubler and a skin crack in section 41 of the fuselage, and multiple reports of cracked or missing fastener heads. This AD requires repetitive inspections for cracking of the fuselage skin, discrepant fasteners, and for disbonds at the doublers; and related investigative and corrective actions if necessary. For certain airplanes, this AD also requires a terminating repair for repair doublers. We are issuing this AD to prevent rapid decompression and loss of structural integrity of the airplane due to such disbonding and subsequent cracking of the skin panels.
Which aircraft AD 2013-24-11 applies to
Applies to airplanes identified in Boeing Service Bulletin 747-53A2747, Revision 2, dated February 22, 2012.
Whether AD 2013-24-11 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.