Is AD 2013-23-15 a recurring Airworthiness Directive?

Yes — AD 2013-23-15 requires a repetitive inspection. Next-due depends on the aircraft's time in service.

Which aircraft does AD 2013-23-15 apply to?

AD 2013-23-15 applies to Boeing — models 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2013-23-15

recurring

Official AD 2013-23-15 · FR doc 2013-27845 · 2013-11-25 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

We are superseding Airworthiness Directive (AD) 2009-06-02, which applied to certain The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747SR, and 747SP series airplanes. AD 2009-06-02 required repetitive inspections for skin cracks at the shear tie end fastener locations of the fuselage frames, and repair of cracks if necessary. This new AD also requires repetitive inspections for skin cracks next to the shear tie on airplanes with certain existing repair doublers, and corrective actions if necessary. This AD also revises the applicability to include additional airplanes. This AD was prompted by additional cracking found on an airplane not affected by AD 2009-06-02. We are issuing this AD to detect and correct fatigue cracks in the fuselage skin that can propagate and grow, and result in reduced structural integrity and sudden decompression of the airplane in flight.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2013-23-15 applies to

MakesBoeing

Models747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, 747SP, 747

As identified in Boeing Alert Service Bulletin 747-53A2682, Revision 1, dated May 24, 2012.

Whether AD 2013-23-15 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2013-23-15 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.