Airworthiness Directive 2013-22-18
recurringAirworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135ER, - 135KE, -135KL, and -135LR airplanes; and Model EMB-145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP airplanes. This AD requires repetitive detailed inspections to detect discrepancies on the attaching parts of the lower eyelet fitting of the cockpit windshield center-post, and, if no discrepancy is found, a check to make sure the bolts are tight, and replacement of the attaching parts if necessary. This AD also provides an option to accomplish the replacement of the attaching parts, which terminates the repetitive inspections. This AD was prompted by reports of failure of the bolts that connect the lower eyelet fitting of the cockpit windshield center-post to the forward fuselage. We are issuing this AD to detect and correct failed bolts and attaching parts of the lower eyelet fitting of the cockpit windshield center-post, which could lead to loss of structural integrity of the airplane.
Which aircraft AD 2013-22-18 applies to
As identified in EMBRAER Service Bulletin 145-53-0082, dated October 18, 2013.
Whether AD 2013-22-18 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.