TailplateTailplate
Run a report

Airworthiness Directive 2013-22-15

one-time
Official AD 2013-22-15 · FR doc 2013-26043 · 2013-11-08 · airframe

Airworthiness Directives; Sikorsky Aircraft Corporation (Sikorsky) Helicopters

What this AD requires

We are adopting a new airworthiness directive (AD) for Sikorsky Model S-76A, B, and C helicopters to require certain inspections of each spindle cuff assembly or blade fold cuff assembly for a crack. If there is a crack, this AD requires replacing the cracked part. If there is no crack, this AD requires applying white paint to the inspection area to enhance the existing inspection procedure. This AD was prompted by discovery of cracks in the spindle cuffs. The actions are intended to prevent failure of a spindle cuff assembly or blade fold cuff assembly, loss of a rotor blade, and subsequent loss of control of the helicopter.

Which aircraft AD 2013-22-15 applies to

Applicability depends on the aircraft’s type certificate — check it against the specific tail.

Whether AD 2013-22-15 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2013-22-15 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.