Airworthiness Directive 2013-18-08
recurringAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
We are superseding airworthiness directive (AD) 2004-18-06 for certain The Boeing Company Model 737-200, -200C, -300, -400, and -500 series airplanes. AD 2004-18-06 required repetitive inspections to find fatigue cracking of certain upper and lower skin panels of the fuselage, and follow-on and corrective actions if necessary. AD 2004- 18-06 also included a terminating action for the repetitive inspections of certain modified or repaired areas only. This new AD adds new inspections for cracking of the fuselage skin along certain chem-milled lines, and corrective actions if necessary. This new AD also reduces certain thresholds and intervals required by AD 2004-18-06. This AD was prompted by new findings of vertical cracks along chem-milled steps adjacent to the butt joints. We are issuing this AD to detect and correct fatigue cracking of the skin panels, which could result in sudden fracture and failure of the skin panels of the fuselage, and consequent rapid decompression of the airplane.
Which aircraft AD 2013-18-08 applies to
As identified in Boeing Alert Service Bulletin 737-53A1210, Revision 3, dated July 16, 2009.
Whether AD 2013-18-08 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.