Airworthiness Directive 2013-16-13
one-timeAirworthiness Directives; Eurocopter Deutschland GmbH Helicopters
What this AD requires
We are adopting a new airworthiness directive (AD) for Eurocopter Deutschland GmbH (ECD) Model BO-105A, BO-105C, BO-105S, BO- 105LS A-1, BO-105LS A-3, MBB-BK 117 A-1, MBB-BK 117 A-3, MBB-BK 117 A- 4, MBB-BK 117 B-1, MBB-BK-117 B-2, and MBB-BK 117 C-1 helicopters to require inspections for corrosion or thread damage to each tail rotor balance weight (weight) and each tail rotor control lever (lever). This AD was prompted by a European Aviation Safety Agency (EASA) AD and a Transport Canada Civil Aviation (TCCA) AD, both issued based on a report that corrosion was detected on a weight in the area of the attachment thread on a model BO-105 helicopter. The actions of this AD are intended to detect corrosion and thread damage in the threaded area of the weight and lever, and to prevent failure of a weight or lever, separation of tail rotor parts, severe vibration, and subsequent loss of control of the helicopter.
Which aircraft AD 2013-16-13 applies to
Applicability conditional on specific tail rotor control lever and tail rotor balance weight part numbers installed, varying by model (see AD text for full per-model lever/weight P/N combinations).
Whether AD 2013-16-13 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.