Airworthiness Directive 2013-05-08

one-time
Official AD 2013-05-08 · FR doc 2013-10653 · 2013-05-09 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for all Airbus Model A330-200 and A330-300 series airplanes, and Model A340-200 and A340-300 series airplanes. This AD was prompted by reports of an elevator blocked in the down position due to two independent failures; first, the inability of a servo control to switch to active mode because it was not detected by a flight control computer; and second, an internal hydraulic leak due to the deterioration of an O-ring seal on a solenoid. This AD requires, depending on airplane configuration, modifying three flight control primary computers (FCPCs); modifying two flight control secondary computers (FCSCs); revising the airplane flight manual (AFM) to include certain information; replacing certain O-rings; and checking part number and replacing certain O-ring seals if needed. We are issuing this AD to detect and correct O-rings with incorrect part numbers whose deterioration could lead to improper sealing of solenoid valves; and to correct FCPC and FCSC software to allow better control of elevator positioning; both conditions, if not corrected, could lead to the loss of elevator control on takeoff, and potentially reduce the controllability of the airplane.

Which aircraft AD 2013-05-08 applies to

MakesAirbus
ModelsA330-201, A330-202, A330-203, A330-223, A330-243, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A330, A340

Applies to all manufacturer serial numbers (MSN).

Whether AD 2013-05-08 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD 2013-05-08 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.