Airworthiness Directive 2013-08-01
one-timeAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This AD was prompted by reports of damaged fire seals on the forward edge of the thrust reverser. This AD requires inspecting to detect damage to the upper fire seals on the forward edge of the thrust reverser, where the fire seal contacts the 12-o'clock engine strut, and for correct stiffness and vent holes, and doing corrective actions if necessary; and installing a bracket for the fire seal. We are issuing this AD to detect and correct damage to the fire seals, which could allow airflow into the engine fire zone and could degrade the ability to extinguish an engine fire.
Which aircraft AD 2013-08-01 applies to
Range given is Boeing line numbers (L/Ns), not manufacturer serial numbers.
Whether AD 2013-08-01 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.