Is AD 2013-07-04 a recurring Airworthiness Directive?

No — AD 2013-07-04 is a one-time directive. Verify it was complied with in the aircraft's records.

Which aircraft does AD 2013-07-04 apply to?

AD 2013-07-04 applies to Airbus — models A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2013-07-04

one-time

Official AD 2013-07-04 · FR doc 2013-08570 · 2013-04-15 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are superseding an existing airworthiness directive (AD) for certain Airbus Model A319, A320, and A321 series airplanes. That AD currently requires installing spacer assemblies at the attachment points of the YZ-latches of the cargo loading system (CLS) in the forward and aft cargo compartments, as applicable. This new AD also requires modifying the attachment points of fixed YZ-latches of the CLS lower deck cargo holds on those airplanes on which one or both lower deck cargo holds have not been modified, which terminates the existing requirements. This AD was prompted by results from tests that have shown that the attachment points of the YZ-latches of the cargo loading system (CLS) fail under maximum loads and reports that installation has been applied only on one of the lower deck cargo holds, instead of on both forward and aft cargo holds, and that some airplanes could have installed the affected YZ-latches through the instructions of the cargo conversion manual. We are issuing this AD to prevent failure of the attachment points of the YZ-latches, which could result in unrestrained cargo causing damage to the fire protection system, hydraulic system, electrical wiring, or other equipment located in the forward and aft cargo compartments. This damage could adversely affect the continued safe flight of the airplane.

Which aircraft AD 2013-07-04 applies to

MakesAirbus

ModelsA319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-111, A320-211, A320-212, A320-214, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A319, A320, A321

All manufacturer serial numbers.

Whether AD 2013-07-04 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2013-07-04 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.