Airworthiness Directive 2013-08460

one-time
AD 2013-08460 · 2013-04-15 · reciprocating engine

Airworthiness Directives; BRP-Powertrain GmbH & Co KG Rotax Reciprocating Engines

What this AD requires

We are adopting a new airworthiness directive (AD) for certain BRP-Powertrain GmbH & Co KG Rotax 912 F2; 912 F3; 912 F4; 912 S2; 912 S3; 912 S4; 914 F2; 914 F3; and 914 F4 reciprocating engines. This AD requires a one-time visual inspection for excessive oil deposits or carbon deposits on the No. 2 and No. 3 spark plug center and grounding electrodes, and if found, replacement of the cylinder head before further flight. This AD was prompted by a report of certain No. 2 and No. 3 cylinder heads not manufactured to proper specification. We are issuing this AD to prevent excessive oil consumption, which could result in an in-flight engine shutdown, forced landing, and damage to the airplane.

Which aircraft AD 2013-08460 applies to

MakesRotax

Whether AD 2013-08460 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD 2013-08460 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.