Airworthiness Directive 2013-04-13
one-timeAirworthiness Directives; BAE SYSTEMS (OPERATIONS) LIMITED Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for all BAE SYSTEMS (OPERATIONS) LIMITED Model BAe 146 and Avro 146-RJ series airplanes. This AD was prompted by a report that certain ceramic terminal blocks, through which the wiring for the engine fire extinguishers, fire detection circuits, and engine and intake anti-ice system are routed, have been found to have moisture ingress, which can degrade the insulation resistance of the ceramic terminal blocks. This AD requires a one-time insulation resistance test of ceramic terminal blocks, and if necessary, replacement of the blocks. We are issuing this AD to prevent latent failure of the number 2 fire bottle, which, in the event of an engine fire, could result in failure of the fire bottle to discharge when activated and possibly preventing the flightcrew from extinguishing an engine fire.
Which aircraft AD 2013-04-13 applies to
Covers Model BAe 146-100A, -200A, -300A airplanes and Model Avro 146-RJ70A, 146-RJ85A, 146-RJ100A airplanes, certificated in any category.
Whether AD 2013-04-13 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.