Airworthiness Directive 2012-08-12
one-timeAirworthiness Directives; Airbus Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for all Airbus Model A310 series airplanes. This AD was prompted by a report of an electrical arc and hydraulic haze in the wheel bay of the left-hand main landing gear (MLG) possibly resulting from chafing between the hydraulic high pressure hose and electrical wiring of the green electrical motor pump (EMP). This AD requires temporarily prohibiting in-flight use of the green EMPs; temporarily revising the airplane flight manual (AFM) limitations section; temporarily installing a placard in the cockpit overhead panel; doing a one-time general visual inspection for correct condition and installation of hydraulic pressure hoses, electrical conduits, feeder cables, and associated clamping devices; and corrective action if necessary. We are issuing this AD to detect and correct chafing of hydraulic pressure hoses and electrical wiring of the green EMPs, which in combination with a system failure, could cause an uncontrolled and undetected fire in the MLG bay.
Which aircraft AD 2012-08-12 applies to
Whether AD 2012-08-12 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.