Airworthiness Directive 2012-06-20
one-timeAirworthiness Directives; Fokker Services B.V. Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain Fokker Services B.V. Model F.28 Mark 0070 and 0100 airplanes. This AD was prompted by a report that the fuel crossfeed valves cannot be controlled when only emergency electrical power is available, that an unwanted configuration of the indication logic for the fuel fire shutoff valve was introduced during production, and that current fuel crossfeed indications are based on selection by the flightcrew instead of actual position of the crossfeed valve actuators. This AD requires modifying the crossfeed valve control and power supply, the crossfeed indication logic and power supply, and the indication logic for the fuel fire shutoff valve; modifying the overhead panel; and for certain airplanes, modifying the transfer logic of the center wing fuel tank. We are issuing this AD to prevent failure of an in-flight engine re- light following a double engine flame-out event, which could result in loss of the airplane.
Which aircraft AD 2012-06-20 applies to
Whether AD 2012-06-20 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.