Airworthiness Directive 2012-07-07
recurringAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 747 airplanes. This AD was prompted by reports of fractured latch pins found in service; investigation revealed that the cracking and subsequent fracture were initiated by fatigue and propagated by a combination of fatigue and stress corrosion. This AD requires repetitive general visual inspections for broken or missing latch pins of the lower sills of the forward and aft lower lobe cargo doors; repetitive detailed inspections for cracking of the latch pins; and corrective actions if necessary. We are issuing this AD to detect and correct fractured or broken latch pins, which could result in a forward or aft lower lobe cargo door opening and detaching during flight, and consequent rapid decompression of the airplane.
Which aircraft AD 2012-07-07 applies to
Whether AD 2012-07-07 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.