Airworthiness Directive 2012-07-04
one-timeAirworthiness Directives; Cessna Aircraft Company Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain Cessna Aircraft Company Model 680 airplanes. This AD was prompted by a false cross-feed command to the right-hand fuel control card, due to the cross-feed inputs on the left- and right-hand fuel control cards being connected together and causing an imbalance of fuel between the left and right wing tanks. This AD requires adding diodes to the fuel cross-feed wiring, and revising the airplane flight manual to include procedures to use when the left or right generator is selected OFF. We are issuing this AD to prevent lateral imbalance of the airplane, resulting from uncontrolled fuel cross-feed, which can be corrected by deflecting the aileron trim; deflecting the aileron trim increases the pilot's workload and could exceed the airplane's limitation in a short period of time, resulting in reduced controllability of the airplane.
Which aircraft AD 2012-07-04 applies to
Whether AD 2012-07-04 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.