Is AD 2012-26-51 a recurring Airworthiness Directive?

No — AD 2012-26-51 is a one-time directive. Verify it was complied with in the aircraft's records.

Which aircraft does AD 2012-26-51 apply to?

AD 2012-26-51 applies to Airbus — models A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2012-26-51

one-time

Official AD 2012-26-51 · FR doc 2012-31683 · 2013-01-09 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for all Airbus Model A318, A319, A320, and A321 series airplanes. This emergency AD was sent previously to all known U.S. owners and operators of these airplanes. This AD requires revising the airplane flight manual (AFM) to advise the flight crew of emergency procedures for addressing Angle of Attack (AoA) sensor blockage. This AD also provides for optional terminating action for the AFM revision, which involves replacing AoA sensor conic plates with AoA sensor flat plates. This AD was prompted by a report that an airplane equipped with AoA sensors installed with conic plates recently experienced blockage of all sensors during climb, leading to autopilot disconnection and activation of the alpha protection (Alpha Prot) when Mach number was increased. We are issuing this AD to prevent reduced control of the airplane.

Which aircraft AD 2012-26-51 applies to

MakesAirbus

ModelsA318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-111, A320-211, A320-212, A320-214, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A318, A319, A320, A321

Whether AD 2012-26-51 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2012-26-51 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.