Airworthiness Directive 2012-02-14
one-timeAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This AD was prompted by a report that the top 3 inches of the aero/fire seals of the blocker doors on the thrust reverser torque boxes are not fireproof. This AD requires a one-time inspection to determine the part numbers of the aero/fire seals of the blocker doors on the thrust reverser torque boxes on the engines, and replacing affected aero/fire seals with new, improved aero/fire seals. We are issuing this AD to prevent a fire in the fan compartment (a fire zone) from migrating through the seal to a flammable fluid in the thrust reverser actuator compartment (a flammable fluid leakage zone), which could result in an uncontrolled fire.
Which aircraft AD 2012-02-14 applies to
Whether AD 2012-02-14 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.