TailplateTailplate
Run a report

Airworthiness Directive 2012-22-03

recurring
Official AD 2012-22-03 · FR doc 2012-26666 · 2012-11-26 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747- 200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP series airplanes. This AD was prompted by reports of cracks in the main entry door number 1 upper main sill outer chord, along the bend radius of the chord on several airplanes. This AD requires a general visual inspection to identify any existing structural repair manual (SRM) repairs of the upper main sill outer chord of the left and right side main entry door number 1, repetitive detailed inspections for cracks in the upper main sill of the door(s); and related investigative and corrective actions, if necessary. This AD also requires repetitive inspections for airplanes on which a certain repair is done, and corrective actions if necessary, and reduces certain compliance times. We are issuing this AD to detect and correct cracks in the main entry door number 1 upper main sill outer chord, along the bend radius of the chord, which could result in loss of structural integrity of the airplane.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2012-22-03 applies to

MakesBoeing
Models747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, 747SP, 747

Whether AD 2012-22-03 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2012-22-03 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.