Is AD 2012-20-07 a recurring Airworthiness Directive?

No — AD 2012-20-07 is a one-time directive. Verify it was complied with in the aircraft's records.

Which aircraft does AD 2012-20-07 apply to?

AD 2012-20-07 applies to Airbus — models A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2012-20-07

one-time

Official AD 2012-20-07 · FR doc 2012-24953 · 2012-10-17 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are superseding an existing airworthiness directive (AD) for all Airbus Model A318-111 and -112 airplanes; and all Model A319, A320, and A321 series airplanes. That AD currently requires revising the Airworthiness Limitations Section (ALS) of the Instructions for Continued Airworthiness to incorporate new limitations for fuel tank systems. This new AD requires revising the maintenance program to incorporate revised fuel maintenance and inspection tasks, and adds airplanes to the applicability. This AD was prompted by Airbus issuing more restrictive maintenance requirements and/or airworthiness limitations. We are issuing this AD to prevent the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.

Which aircraft AD 2012-20-07 applies to

MakesAirbus

ModelsA318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-111, A320-211, A320-212, A320-214, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A318, A319, A320, A321

Applies to all serial numbers of the listed models. Also requires revisions to certain operator maintenance documents to add new inspections/CDCCLs per 14 CFR 91.403(c); operators unable to accomplish inspections due to prior modification/alteration/repair must request an AMOC.

Whether AD 2012-20-07 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2012-20-07 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.