Airworthiness Directive 2012-20-01
recurringAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-100, -200, and -200C series airplanes. This AD was prompted by a report of a severed upper butt strap, and cracks in the forward skin and bonded doubler, on one airplane. This AD requires repetitive inspections for cracks and a chemical spot test in the area of station (STA) 908, and related investigative and corrective actions, if necessary. For certain airplanes, this AD requires an inspection and modification. We are issuing this AD to prevent cracks at the adjacent mating skins (forward and aft), which could initiate just above stringers S-4R and S-4L; and could grow and result in a decompression event.
Which aircraft AD 2012-20-01 applies to
Limited to airplanes identified in Boeing Special Attention Service Bulletin 737-53-1313, dated November 3, 2011.
Whether AD 2012-20-01 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.