Is AD 2011-19-01 a recurring Airworthiness Directive?

No — AD 2011-19-01 is a one-time directive. Verify it was complied with in the aircraft's records.

Which aircraft does AD 2011-19-01 apply to?

AD 2011-19-01 applies to Airbus — models A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2011-19-01

one-time

Official AD 2011-19-01 · FR doc 2012-18625 · 2012-08-07 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are revising an existing airworthiness directive (AD) that applies to all Airbus Model A318, A319, A320, and A321 series airplanes. The existing AD currently requires revising the airplane flight manual (AFM) to include a procedure intended to address the unsafe condition, an inspection of the firewall connector for signs of arcing if an integrated drive generator (IDG) (or generator (GEN)) was shut down in-flight automatically or using the AFM procedure, and corrective action if necessary; and provides an optional terminating action for certain AFM revision and inspections. This AD was prompted by the potential for an inadvertent error by flightcrew to use the IDG switch instead of the GEN switch when doing the AFM display unit failure procedure required by the existing AD. This AD retains the actions required by the existing AD and clarifies certain terminology. We are issuing this AD to prevent transient loss of certain systems, which could result in the reduced ability of the flightcrew to cope with adverse flight conditions.

Which aircraft AD 2011-19-01 applies to

MakesAirbus

ModelsA318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-111, A320-211, A320-212, A320-214, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A318, A319, A320, A321

Whether AD 2011-19-01 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2011-19-01 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.