Airworthiness Directive 2012-12-15
recurringAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
We are superseding an existing airworthiness directive (AD) for The Boeing Company Model 757 Airplanes. That AD currently requires revising the Airworthiness Limitations (AWLs) section of the Instructions for Continued Airworthiness by incorporating new limitations for fuel tank systems to satisfy Special Federal Aviation Regulation No. 88 requirements. That AD also requires the initial inspection of certain repetitive AWL inspections to phase- in those inspections, and repair if necessary. This new AD requires actions that were provided previously as optional actions, and would require a certain initial inspection to be accomplished for a revised AWL. This AD was prompted by a report that an AWL required by the existing AD must be revised. We are issuing this AD to prevent the potential for ignition sources inside fuel tanks caused by latent failures, alterations, repairs, or maintenance actions, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.
Which aircraft AD 2012-12-15 applies to
Whether AD 2012-12-15 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.