Is AD 2012-13-09 a recurring Airworthiness Directive?

Yes — AD 2012-13-09 requires a repetitive inspection every 12000 hours. Next-due depends on the aircraft's time in service.

Which aircraft does AD 2012-13-09 apply to?

AD 2012-13-09 applies to Boeing — models 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2012-13-09

recurring

Official AD 2012-13-09 · FR doc 2012-16333 · 2012-07-12 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP series airplanes. This AD was prompted by several reports of electrical arcs at terminal "A" of the electrically heated flight deck window 1. This AD requires repetitive inspections for damage of the electrical connections at terminal "A" of the left and right flight deck window 1, and corrective actions if necessary. This AD also allows for replacing a flight deck window 1 with a new improved flight deck window 1 equipped with different electrical connections, which would terminate the repetitive inspections for that window. We are issuing this AD to prevent smoke and fire in the cockpit, which could lead to loss of visibility, and injuries to or incapacitation of the flight crew.

Repetitive inspection. Re-inspect every 12000 hours. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2012-13-09 applies to

MakesBoeing

Models747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, 747SP, 747

Applies only to airplanes identified in Boeing Service Bulletin 747-30-2081, Revision 3, dated December 5, 2011.

Whether AD 2012-13-09 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2012-13-09 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.