Airworthiness Directive 2012-12-03
one-timeAirworthiness Directives; Rolls-Royce plc Turbofan Engines
What this AD requires
We are superseding an existing airworthiness directive (AD) for all Rolls-Royce plc (RR) models RB211-Trent 970-84, 970B-84, 972- 84, 972B-84, 977-84, 977B-84, and 980-84 turbofan engines. That AD currently requires inspecting the intermediate-pressure (IP) shaft rigid coupling splines for wear resulting in rearward movement of the IP turbine. This AD requires the same inspections, and new inspections based on possible changes in wear rate. This AD was prompted by RR identifying wear beyond engine manual limits on the abutment faces of the splines. RR also determined that an additional IP shaft rigid coupling configuration requires inspection. We are issuing this AD to detect wear on the abutment faces of the splines, which could result in loss of disc integrity, an uncontained failure of the engine, and damage to the airplane.
Which aircraft AD 2012-12-03 applies to
Whether AD 2012-12-03 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.