Airworthiness Directive 2012-12-12
recurringAirworthiness Directives; Airbus Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for all Airbus Model A330-200 series airplanes; Airbus Model A330-200 Freighter series airplanes; Airbus Model A330-300 series airplanes; Airbus Model A340-200 series airplanes; and Airbus Model A340-300 series airplanes. This AD was prompted by reports of sheared fasteners located on the outside skin of the forward cargo door and cracks on the frame fork ends, as well as cracks of the aft cargo door frame 64A. This AD requires performing a detailed inspection of the outer skin rivets at the frame fork ends of the forward and aft cargo door for sheared, loose, and missing rivets; repairing the outer skin rivets, if necessary; and performing repetitive inspections. We are issuing this AD to detect and correct sheared, loose, or missing fasteners on the forward and aft cargo door frame, which could result in the loss of structural integrity of the forward and aft cargo door.
Which aircraft AD 2012-12-12 applies to
Whether AD 2012-12-12 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.