Airworthiness Directive 2012-09-09
recurringAirworthiness Directives; International Aero Engines AG Turbofan Engines
What this AD requires
We are superseding an existing airworthiness directive (AD) for all International Aero Engines AG (IAE) V2500-A1, V2525-D5 and V2528-D5 turbofan engines, and certain serial numbers (S/Ns) of IAE V2522-A5, V2524-A5, V2527-A5, V2527E-A5, V2527M-A5, V2530-A5, and V2533-A5 turbofan engines. That AD currently requires initial and repetitive ultrasonic inspections (USIs) of certain high-pressure compressor (HPC) stage 3 to 8 drums, and replacement of drum attachment nuts. This new AD expands the affected population for initial and repetitive inspections of the HPC stage 3 to 8 drum, introduces an eddy current inspection (ECI) procedure, and requires additional cleaning and repetitive USI of some HPC stage 3 to 8 drums. We are issuing this AD to prevent uncontained failure of the HPC stage 3 to 8 drum, which could result in damage to the airplane.
Which aircraft AD 2012-09-09 applies to
V2500-A1, V2525-D5, and V2528-D5 apply to all serial numbers. The serial number ranges (up to and including V13181, and V15000 through V15245 inclusive) apply only to V2522-A5, V2524-A5, V2527-A5, V2527E-A5, V2527M-A5, V2530-A5, and V2533-A5 engines.
Whether AD 2012-09-09 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.