Airworthiness Directive 2012-09-01
one-timeAirworthiness Directives; Cessna Aircraft Company Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain Cessna Aircraft Company Model 560XL airplanes. This AD was prompted by reports of wheel inserts becoming loose and damaging brake assemblies on Model 560XL airplanes. This AD requires an inspection of the torque lug and surrounding components (wheel base, side rim, lock ring) for damage (such as corrosion, cracks, dents, bent areas, damaged or missing paint or primer, or wear on the metal), and of the bearing cup for corrosion, turned cup, or clearance that exceeds limits, and repair as applicable; measuring the torque lugs for width and replacing screws and inserts with new, improved screws and inserts; and re-identifying the wheel assemblies. We are issuing this AD to prevent brake failure, which could result in an airplane not being able to stop on the runway.
Which aircraft AD 2012-09-01 applies to
Whether AD 2012-09-01 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.