Airworthiness Directive 2010-06-02
one-timeAirworthiness Directives; Hawker Beechcraft Corporation Model G58 Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain Hawker Beechcraft Corporation Model G58 airplanes. This AD requires inspecting the installation of stand-off hardware between the heater fuel line and the heater over-temperature sensor wires and also brake reservoir tubing and the heater fuel pump wiring for minimum clearance and installing acceptable stand-off hardware if stand-off hardware is missing or inadequate. This AD results from reports received of a power wire shorting out on the brake reservoir tube. We are issuing this AD to detect and correct inadequate clearance of the brake reservoir tubing and the heater fuel pump wiring, which could result in chafing and shorting out of the electrical wiring and chafing of the tubing carrying flammable fluids. This condition could lead to a fire in the nose wheel well.
Which aircraft AD 2010-06-02 applies to
Whether AD 2010-06-02 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.