Is AD 2010-26-07 a recurring Airworthiness Directive?

Yes — AD 2010-26-07 requires a repetitive inspection. Next-due depends on the aircraft's time in service.

Which aircraft does AD 2010-26-07 apply to?

AD 2010-26-07 applies to Boeing — models 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2010-26-07

recurring

Official AD 2010-26-07 · FR doc 2010-31985 · 2010-12-28 · airframe

Airworthiness Directives; The Boeing Company Model 747 Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires repetitive inspections for cracking in the body skin around the aft corners of the nose wheel well; for certain airplanes, repetitive inspections for cracking in the skin splice plate at the aft corners of the nose wheel well; and related investigative and corrective actions if necessary. This AD also requires repetitive post-modification inspections for cracking in the body skin and the skin splice plate; for certain airplanes, an inspection for steel cross-shaped doublers on the larger aluminum doublers; and corrective action if necessary. This AD also requires repetitive surface high frequency eddy current (HFEC) inspections of a certain bulkhead outer chord, skin splice plate, and outer chord radius filler for cracking; repetitive detailed inspections for cracking of the bulkhead frame web and body skin; and corrective actions if necessary. This AD provides for optional terminating action for certain repetitive inspections. This AD was prompted by reports of cracking of the fuselage skin and adjacent internal skin splice plate at the left and right nose wheel well aft corners, and the outer chord of the body station (BS) 400 bulkhead. We are issuing this AD to detect and correct cracking of the fuselage skin or splice plate, which, together with cracking of the bulkhead outer chord, could result in large skin cracks and subsequent in-flight rapid decompression of the airplane.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2010-26-07 applies to

MakesBoeing

Models747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, 747SP, 747

Whether AD 2010-26-07 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2010-26-07 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.