Airworthiness Directive 2010-20-16
one-timeAirworthiness Directives; Airbus Model A300 B4-600, B4-600R, and F4-600R Series Airplanes, and Model A300 C4-605R Variant F Airplanes (Collectively Called A300-600 Series Airplanes); and Model A300 and A310 Series Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: * * * * * Two cases of complete nose landing gear (NLG) shock absorber bolts failure were reported to the manufacturer. In both cases, the crew was unable to retract the gear and was forced to an In Flight Turn Back. In one case, the aircraft experienced a low speed runway excursion. The root cause of the bolts failure has been identified being due to a bolt(s) over-torque. The investigation has highlighted that the design of the NLG shock absorber was not tolerant to the over-torque, and an inspection plan has been developed to track any NLG shock absorber-to-main barrel attachment bolts status. * * * * * * * * We are issuing this AD to require actions to correct the unsafe condition on these products.
Which aircraft AD 2010-20-16 applies to
Applies to all serial numbers except airplanes on which Airbus Modification 13212 was done in production, or Airbus Service Bulletin A300-32-0453, A310-32-2135, or A300-32-6099 was done in service.
Whether AD 2010-20-16 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.