Is AD 2010-20-08 a recurring Airworthiness Directive?

Yes — AD 2010-20-08 requires a repetitive inspection. Next-due depends on the aircraft's time in service.

Which aircraft does AD 2010-20-08 apply to?

AD 2010-20-08 applies to Boeing — models 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2010-20-08

recurring

Official AD 2010-20-08 · FR doc 2010-23840 · 2010-10-05 · airframe

Airworthiness Directives; The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, and 747SR Series Airplanes

What this AD requires

The FAA is superseding an existing airworthiness directive (AD), which applies to all Boeing Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747- 400F, and 747SR series airplanes. That AD currently requires repetitive inspections to find cracking of the web, strap, inner chords, and inner chord angle of the forward edge frame of the number 5 main entry door cutouts, and repair, if necessary. This new AD requires expanding the inspection areas to include the frame segment between stringers 16 and 23. This AD reinstates the repetitive inspections specified above for certain airplanes. This AD also requires repetitive inspections for cracking of repairs. This AD results from additional reports of cracks that have been found in the strap and inner chord of the forward edge frame of the number 5 main entry door cutouts, between stringers 16 and 23. We are issuing this AD to detect and correct such cracks. This condition, if not corrected, could cause damage to the adjacent body structure, which could result in depressurization of the airplane in flight.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2010-20-08 applies to

MakesBoeing

Models747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, 747

Applies to line numbers 1 through 1419 inclusive; excludes airplanes modified into Large Cargo Freighter (LCF) configuration in which the 46-section (station 1960 to 2360) was removed and replaced with a new swing-zone and 47-section. Line numbers 1420 and subsequent (Model 747-8/747-8F) are not affected. Identified via Boeing Alert Service Bulletin 747-53A2450, Revision 5, dated January 29, 2009.

Whether AD 2010-20-08 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2010-20-08 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.