Airworthiness Directive 06-921
one-timeAirworthiness Directives; Raytheon Aircraft Company Model 390 Airplanes
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for certain Raytheon Aircraft Company Model 390 airplanes. This AD contains the same information as emergency AD 2006-02-51 and publishes the action in the Federal Register. This AD requires you to visually inspect the hydraulic tube assembly (P/N 390-580035-0001 or P/N 390- 580035-0005) and the clamp (P/N MS21919WCJ6 or P/N MS21919WCJ7) (or FAA-approved equivalent part numbers), as specified in the service information; replace the clamp at each inspection; replace the hydraulic tube assembly immediately if any of the problems identified in the service bulletin are found; and report the results of each inspection or replacement to the FAA. This AD results from failure of the hydraulic tube assembly, which caused in-flight loss of hydraulic fluid. We are issuing this AD to prevent failure of the hydraulic tube assembly and consequent leaking of hydraulic fluid. This failure could result in loss of hydraulic system functions and risk of fire because of flammable fluid leakage in the engine nacelle and lead to loss of control of the airplane.
Which aircraft AD 06-921 applies to
certain
Whether AD 06-921 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.