Airworthiness Directive 06-8226
one-timeAirworthiness Directives; Bombardier Model DHC-8-102, -103, and -106 Airplanes, and Model DHC-8-200 and DHC-8-300 Series Airplanes
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier Model DHC-8-102, -103, and -106 airplanes, and Model DHC-8-200 and DHC-8-300 series airplanes. This AD requires performing a one-time general visual inspection for non-conforming chain links of chain assemblies of the elevator trim system and gust lock system, and corrective actions if necessary. This AD also requires temporary revisions to the airplane flight manuals of the affected airplanes, which describe procedures for elevator trim checks. This AD results from reports of several failures of the elevator trim chain, due to hydrogen embrittlement. We are issuing this AD to prevent breakage of the elevator trim chain, which would prevent the actual position of the elevator trim tab from being annunciated to the flightcrew. Attempting to adjust the trim tab from the full nose up or full nose down position with a broken trim chain could result in misleading information relative to takeoff trim settings and consequent loss of control on takeoff.
Which aircraft AD 06-8226 applies to
Whether AD 06-8226 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.