Is AD 06-5244 a recurring Airworthiness Directive?

Yes — AD 06-5244 requires a repetitive inspection. Next-due depends on the aircraft's time in service.

Which aircraft does AD 06-5244 apply to?

AD 06-5244 applies to Airbus — models B4-600R. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 06-5244

recurring

AD 06-5244 · 2006-06-13 · airframe

Airworthiness Directives; Airbus Model A300 B2 and A300 B4 Series Airplanes; A300 B4-600, B4-600R, and F4-600R Series Airplanes; and Model C4-605R Variant F Airplanes (Collectively Called A300-600 Series Airplanes)

What this AD requires

The FAA is superseding an existing airworthiness directive (AD), which applies to certain Airbus Model A300 and A300-600 series airplanes. That AD currently requires repetitive inspections to detect cracks in Gear Rib 5 of the main landing gear (MLG) attachment fittings at the lower flange, and repair, if necessary. That AD also requires modification of Gear Rib 5 of the MLG attachment fittings, which constitutes terminating action for the repetitive inspections. This new AD requires new repetitive inspections at reduced compliance times. This new AD also requires new repetitive inspections of certain areas of the attachment fittings that were repaired in accordance with the actions specified in the existing AD. This AD results from new service information that was issued by the manufacturer and mandated by the French airworthiness authority. We are issuing this AD to prevent fatigue cracking of the MLG attachment fittings, which could result in reduced structural integrity of the airplane.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 06-5244 applies to

MakesAirbus

ModelsB4-600R

certain

Whether AD 06-5244 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 06-5244 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.