Airworthiness Directive 06-5125
one-timeAirworthiness Directives; Boeing Model 747-100B, 747-200B, 747-200F, 747-300, 747-400, 747-400F, and 747SP Series Airplanes
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for certain 747-100B, 747-200B, 747-200F, 747-300, 747-400, 747-400F, and 747SP series airplanes. This AD requires doing inspections of the midpivot bolt and midpivot bolt access door of the spring beam of the inboard side of the outboard struts for discrepancies, installing a placard on the midpivot bolt access door, and applicable corrective actions if necessary. This AD results from reports indicating that the midpivot bolt and midpivot bolt access door of the spring beam of the inboard side of the outboard struts were installed in the incorrect position. We are issuing this AD to ensure that the subject midpivot bolts and midpivot bolt access doors are installed in the correct position. If not installed in the correct position, a midpivot bolt could be overloaded and crack or fracture, which could result in the loss of the spring load path and consequent separation of the associated outboard strut and engine from the airplane.
Which aircraft AD 06-5125 applies to
Whether AD 06-5125 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.