Airworthiness Directive 06-3061

recurring
AD 06-3061 · 2006-03-31 · airframe

Airworthiness Directives; McDonnell Douglas Model DC-9-10, DC-9-20, DC-9-30, DC-9-40, and DC-9-50 Series Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for certain McDonnell Douglas Model DC-9-10, DC-9-20, DC-9-30, DC-9-40, and DC-9-50 series airplanes. This AD requires repetitive inspections for stress corrosion cracks of the main fuselage frame, and corrective actions if necessary. This AD also provides an optional terminating action for the repetitive inspections. This AD results from several reports of cracking of the main fuselage frame. We are issuing this AD to detect and correct stress corrosion cracking of the main fuselage frame, which could result in extensive damage to adjacent structure and reduced structural integrity of the airplane.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 06-3061 applies to

ModelsDC-9-20, DC-9-30, DC-9-40, DC-9-50

certain

Whether AD 06-3061 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD 06-3061 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.