Airworthiness Directive 2006-06-06
one-timeAirworthiness Directives; The Cessna Aircraft Company Models 208 and 208B Airplanes
What this AD requires
The FAA is adopting a new airworthiness directive (AD) to supersede AD 2005-07-01, which applies to all The Cessna Aircraft Company (Cessna) Models 208 and 208B airplanes. AD 2005-07-01 currently requires you to incorporate information into the applicable section of the Airplane Flight Manual (AFM). This AD is the result of several accidents/incidents with the affected airplanes during operations in icing conditions, FAA evaluation of Cessna flight test data, Cessna issuing AFM revisions, and FAA determining these revisions are necessary for safe operation. Consequently, this AD updates the actions of AD 2005-07-01 that require incorporation of text in the AFM and requires the insertion of new text in the AFM, and the fabrication and installation of placards. We are issuing this AD to assure that the pilot has enough information to prevent loss of control of the airplane while in-flight during icing conditions.
Which aircraft AD 2006-06-06 applies to
Whether AD 2006-06-06 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.