Airworthiness Directive 2006-01-11
one-timeAirworthiness Directives; The Cessna Aircraft Company Models 208 and 208B Airplanes
What this AD requires
The FAA adopts a new airworthiness directive (AD) for all The Cessna Aircraft Company (Cessna) Models 208 and 208B airplanes. This AD requires you to install the pilot assist handle (part number (P/N) SK208-146-2) (or FAA-approved equivalent part number) and deicing boots on the cargo pod and landing gear fairings (part number (P/N) AK208-6C) (or FAA-approved equivalent part number); and make changes to the Pilot's Operating Handbook (POH) and FAA-approved Airplane Flight Manual (AFM). This AD results from reports of several accidents involving the affected airplanes during operations in flight and in ground icing conditions. We are issuing this AD to provide a safe method to detect ice, snow, frost, or slush adhering to the upper wing (a critical surface) prior to takeoff; and to reduce drag in-flight by shedding ice on the cargo pod and landing gear fairings. Ice adhering to the upper wing surface, cargo pod, or landing gear fairings could result in a reduction in airplane performance with the consequences that the airplane cannot perform a safe takeoff or climb.
Which aircraft AD 2006-01-11 applies to
Whether AD 2006-01-11 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.