Airworthiness Directive 06-16
recurringAirworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135 Airplanes and Model EMB-145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP Airplanes
What this AD requires
The FAA is correcting a typographical error in an existing airworthiness directive (AD) that was published in the Federal Register on December 5, 2005 (70 FR 72363). The error resulted in an incorrect reference to the effective date of Brazilian airworthiness directive 2003-01-03R1. This AD applies to certain EMBRAER Model EMB-135 and Model EMB-145 series airplanes. This AD is superseding an existing AD that currently requires repetitive inspections of the spring cartridges of the elevator gust lock system to determine if the lock washer projection correctly fits the slots in the cartridge flange, and corrective action if necessary, for certain airplanes. This AD retains the requirements of the existing AD and adds a requirement for final terminating action for all affected airplanes.
Which aircraft AD 06-16 applies to
certain
Whether AD 06-16 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.