Is AD 06-1148 a recurring Airworthiness Directive?

Yes — AD 06-1148 requires a repetitive inspection. Next-due depends on the aircraft's time in service.

Airworthiness Directive 06-1148

Q: Which aircraft does AD 06-1148 apply to?

AD 06-1148 applies to Mcdonnell Douglas — models DC-10-10F, DC-10-15, DC-10-30, DC-10-30F, DC-10-40, DC-10-40F, MD-10-10F, MD-10-30F. Serial/part conditions may narrow it to specific aircraft.

recurring

AD 06-1148 · 2006-02-09 · airframe

Airworthiness Directives; McDonnell Douglas Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, DC-10-40F, MD-10-10F, MD-10-30F, MD-11, and MD-11F Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for certain McDonnell Douglas transport category airplanes. This AD requires an initial ultrasonic inspection for cracks of the studbolts of the inboard and outboard hinge fittings of the left and right outboard flaps of the wings. Based on the inspection results, this AD also requires doing repetitive ultrasonic inspections, replacing upper and/or lower studbolts with new or serviceable studbolts, doing a detailed inspection for corrosion of the upper studbolts, doing a magnetic particle inspection for cracks of studbolts, and changing the protection treatment; as applicable. This AD results from reports of corrosion and failures of the upper and lower studbolts of the outboard flaps inboard and outboard hinge fittings. We are issuing this AD to prevent corrosion and subsequent cracking of studbolts, which could result in failure of the flap hinge fittings and their possible separation from the wing rear spar, and consequent reduced controllability of the airplane.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 06-1148 applies to

MakesMcdonnell Douglas

ModelsDC-10-10F, DC-10-15, DC-10-30, DC-10-30F, DC-10-40, DC-10-40F, MD-10-10F, MD-10-30F, MD-11, MD-11F

certain

Whether AD 06-1148 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 06-1148 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.