Airworthiness Directive 05-9981
recurringAirworthiness Directives; Boeing Model 747-200C and 747-200F Series Airplanes
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for all Boeing Model 747-200C and 747-200F series airplanes. This AD requires repetitive inspections for cracking of the left and right C-3 frame upper closure fittings of the nose cargo door, and corrective actions if necessary. This AD also provides an optional modification that, if done, terminates inspections in certain areas. This AD is prompted by reports indicating that fatigue cracking was found in the inboard flange above the flight deck floor on the C-3 frame upper closure fittings of the nose cargo door. We are issuing this AD to detect and correct cracking of the C-3 frame upper closure fittings, which could extend and result in rapid depressurization of the airplane.
Which aircraft AD 05-9981 applies to
Whether AD 05-9981 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.