Airworthiness Directive 2005-01-18
recurringAirworthiness Directives; Raytheon Aircraft Company Beech 100, 200, and 300 Series Airplanes
What this AD requires
The FAA adopts a new airworthiness directive (AD) to supersede AD 93-25-07, which applies to Raytheon Aircraft Company (Raytheon) Beech 100, 200, and 300 series airplanes. AD 93-25-07 currently requires you to repetitively inspect the fuselage stringers for cracks and modify at certain times depending on the number of cracked stringers. This AD is the result of FAA's policy (since 1996) to not allow airplane operation when known cracks exist in primary structure. The fuselage structure is considered primary structure and operation is currently allowed for a certain period of time if less than five fuselage stringers are cracked. Consequently, this AD retains the inspection and modification requirements of AD 93-25-07, but requires you to repair any cracked fuselage stringers. We are issuing this AD to detect and correct any cracked fuselage stringers in the rear pressure bulkhead area, which could result in structural damage to the fuselage. This damage could lead to failure of the fuselage with potential loss of control of the airplane.
Which aircraft AD 2005-01-18 applies to
certain
Whether AD 2005-01-18 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.