Airworthiness Directive 2005-01-15

recurring
Official AD 2005-01-15 · FR doc 05-485 · 2005-01-13 · turbine engine

Airworthiness Directives; Rolls-Royce plc RB211 Trent 875, 877, 884, 884B, 892, 892B, and 895 Series Turbofan Engines

What this AD requires

The FAA is superseding an existing airworthiness directive (AD) for Rolls-Royce plc (RR) RB211 Trent 875, 877, 884, 892, 892B, and 895 series turbofan engines with certain part number (P/N) low pressure compressor (LPC) fan blades installed. That AD currently requires initial and repetitive ultrasonic inspections of the fan blade dovetail roots. This AD requires the same actions except at reduced compliance times for certain blades, defines a specific terminating action to the repetitive blade inspection requirements, and adds the 884B series to the applicability. This AD results from a report of a cracked fan blade found before the blade reached the initial inspection threshold of AD 2002-11-08. This AD also results from the need to reduce a repetitive inspection compliance time due to potential breakdown of blade coating and lubrication on certain blades. We are issuing this AD to prevent multiple LPC fan blade failures due to cracks, which could result in uncontained engine failure and possible damage to the airplane.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2005-01-15 applies to

MakesRolls-Royce Plc
ModelsRB211 Trent 875, RB211 Trent 877, RB211 Trent 884, RB211 Trent 884B, RB211 Trent 892, RB211 Trent 892B, RB211 Trent 895, RB211 Trent
Part-conditionalFK30838, FK30840, FK30842, FW12960, FW12961, FW12962, FW13175.

Applies only to engines with a low pressure compressor (LPC) fan blade, part number FK30838, FK30840, FK30842, FW12960, FW12961, FW12962, or FW13175, installed. These engines are installed on, but not limited to, Boeing 777 series airplanes.

Whether AD 2005-01-15 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD 2005-01-15 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.