Airworthiness Directive 2005-22-13
one-timeAirworthiness Directives; Pilatus Aircraft Ltd. Models PC-12 and PC-12/45 Airplanes
What this AD requires
The FAA adopts a new airworthiness directive (AD) for certain Pilatus Aircraft Ltd. (Pilatus) Models PC-12 and PC-12/45 airplanes. This AD requires you to inspect the left and right main landing gear (MLG) assemblies for any part number (P/N) 532.10.12.077 or FAA- approved equivalent part number bolts that do not have white primed and painted heads; and replace any bolt found with new P/N 532.10.12.077F or FAA-approved equivalent part number bolts in all MLG assemblies. This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Switzerland. We are issuing this AD to detect and correct any P/N 532.10.12.077 or FAA- approved equivalent part number bolts that do not have white primed and painted heads, which could result in corrosion of the bolt and consequent failure of the bolt. This failure could lead to MLG collapse during airplane landing and take-off operations with consequent loss of airplane control.
Which aircraft AD 2005-22-13 applies to
Whether AD 2005-22-13 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.